88
Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * AF Area
You can use the following procedure to change the Auto Focus metering area for
shooting snapshots.
• When recording movies, the AF metering area is always “
U
Spot”.
•
“
O
Tracking” cannot be used in combination with the following features.
Prerecord CS, some BEST SHOT scenes (Move Out CS, Move In CS, Multi-motion
Image, For YouTube, Prerecord (Movie)), Lag Correction
•“— Free” cannot be selected for the AF area while Face Detection is enabled.
Specifying the Auto Focus Area (AF Area)
Spot
This mode takes readings of a small area in the center of the image.
This setting works well with focus lock (page 85).
Free
You can move the focus frame by using [8], [2], [4], and [6] to move
the focus point and then pressing [SET]. To change the focus point
position, select “— Free” again and then use [8], [2], [4] and [6] to
select the position you want.
Tracking
When you half-press the shutter button while this setting is selected, the
focus frame will follow the movement of the subject.
“
U
Spot” or “
O
Tracking”
Focus frame
*
[SET]
“— Free”
Focus point Focus frame
To Next Page
Loading...
Need help?
General
Weight and Dimensions
