181
USING AUDIO
Voice Recording lets you record audio only, without a snapshot
or movie.
Using built-in memory only, you get up to about 36 minutes of
Voice Recording.
1. In a REC mode, align the mode dial with “ ”,
and then press [SET].
2. Use [S], [T], [W], and [X] to select “Voice
Recording” and then press [SET].
This causes “ ” to appear on the monitor screen.
3. Press the shutter
button to start
recording.
• The operation lamp
flashes green while
recording is in progress.
• Pressing [SET] during
recording will insert a
marker into the recording.
During later playback, you
will be able to jump to the
markers in the recording.
4. Press the shutter button again to stop audio
recording and return to the screen in step 3.
• Recording also will stop automatically if memory
becomes full.
Recording Audio Only (Voice
Recording)
Remaining Recording Time
Recording Time
To Next Page
Loading...
Need help?
General
