36
GETTING READY
GETTING READY
Your camera is powered by a rechargeable lithium ion battery
(NP-50).
IMPORTANT!
• Use of any type of battery other than NP-50 is not
supported.
To load the battery
1.
Open the battery cover.
While pressing the battery cover, slide it in the direction
indicated by the arrow.
2. Load the battery into the camera.
With the EXILIM logo on the battery facing downwards (in
the direction of the lens), hold the stopper in the direction
indicated by the arrow as you slide the battery into the
camera. Press the battery in until the stopper secures it in
place.
Charging the Battery
NP-50
Stopper
To Next Page
Loading...
Need help?
General
