44
GETTING READY
■ Turning Power Off
Close the lens cover.
• To turn off the camera while the lens cover is closed, press
[] (PLAY).
NOT
• You can configure the camera so power does not turn on
when you press [ ] (PLAY), or to require that [ ] be
held down for some time before the camera turns on (page
204).
Turning On Power for the First Time
The first time you load a battery into the camera, a screen
appears for configuring screen text language, date, and time
settings. Use the procedure under “Configuring Display
Language, Date, and Time Settings” (page 11) to configure
the settings correctly.
IMPORTANT!
• Failure to set the date and time will cause the wrong
date and time data to be recorded with images.
• If you make a mistake when configuring the language,
date, and time settings, you can change the settings
(pages 198, 201).
B
To Next Page
Loading...
Need help?
General
