88
SHOOTING A SNAPSHOT
1. Set the mode dial to “M”.
2. Press [SET] as many
times as required to
select the shutter
speed setting and
then use [W] and [X]
to set the speed you
want.
3. Press [SET] as many times as required to
select the aperture setting and then use [W]
and [X] to set the aperture value you want.
• When using manual focus, you can also use [SET] to
select “FOCUS” and then use [W] and [X] to focus
manually.
4. Half-press the shutter button.
The camera will focus the image in accordance with your
settings.
• The shutter speed and aperture value on the monitor
screen will turn orange when you press the shutter button
half way if the image is over-exposed or under-exposed.
5. When the image is focused, press the shutter
button the rest of the way to shoot.
M Mode
Aperture
Shutter Speed
To Next Page
Loading...
Need help?
General
