107
ADVANCED SETTINGS
4. After the EV value is the way you want, press
[SET] to apply it.
The exposure compensation value you set remains in effect
until you change it.
IMPORTANT!
• When shooting under very dark or very bright conditions,
you may not be able to obtain satisfactory results even
after performing exposure compensation.
NOT
• You also can change the EV Shift setting using the menu
that appears when you press [MENU] (pages 49, 215).
• Performing an EV shift operation while using multi-pattern
metering will cause the metering mode to switch
automatically to center weighted metering. The metering
mode will return to multi-pattern metering when you change
the exposure compensation value to 0.0 (page 112).
• You can use the key customization feature to configure the
[W] and [X] buttons so they control EV shift (page 119).
This comes in handy when adjusting exposure
compensation while viewing the on-screen histogram
(page 116).
B
To Next Page
Loading...
Need help?
General
