122
ADVANCED SETTINGS
Using Mode Memory to Configure Power
On Default Settings
You can configure the camera so it saves certain settings in
“mode memory” whenever it is turned off, and restores the
settings the next time you turn the camera back on. This keeps
you from having to configure the camera each time you turn it off
and on.
See step 4 of the setting procedure below for information about
the settings you can save with mode memory.
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Memory” and then
press [X].
3. Use [S] and [T] to select the item you want to
configure and then press [X].
4. Use [S] and [T] to select the setting you want
and then press [SET].
To do this:
Select this
setting:
Save the current setting when the
camera turned off, and restore it when
the camera is turned back on
On
Restore the optimum default when the
camera is turned on
Off
To Next Page
Loading...
Need help?
General
