113
ADVANCED SETTINGS
IMPORTANT!
• The metering mode will change to “Center Weighted”
automatically if you change the EV shift value (page 106) to
anything other than 0.0 while “Multi” is selected. The
metering mode will change back to “Center Weighted”
when the EV shift value is changed back to 0.0.
• When “Multi” is selected as the metering mode, the
icon will not be displayed on the monitor screen when you
return to the REC mode information display (page 211).
NOT
• You can use the key customization feature to configure the
[W] and [X] buttons so they control the metering mode
setting (page 119).
The camera’s filter feature lets you add color tints to your images
as you shoot them. The color effect look just like what you would
get by installing a color filter on the lens of the camera.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Filter” and then
press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
Available filter settings are: Off, B/W, Sepia, Red, Green,
Blue, Yellow, Pink, and Purple
Using the Camera’s Filter Effects
To Next Page
Loading...
Need help?
General
