To change the 2 Layers watch face display items
1. While the “2 Layers” watch face is displayed, hold your
finger down in the center of the touch screen for about
two seconds.
●
This shrinks the watch face and displays D below it.
2. Tap in the following in sequence: D > “Display”.
3. Tap “Upper”. On the menu that appears, tap the item
(Date, Barometer, or Heart Rate) that you want to display
in the Upper display area.
4. Tap “Lower”. On the menu that appears, tap the item
(Steps, Battery Level, Altimeter, or Calories Burned) that
you want to display in the Lower display area.
5. To quit the setting procedure and return to the watch
face display, press the power button.
EN-94
To Next Page
Loading...
