E-54
Charging a Battery Pack
Use the optionally available AC adaptor (AD-S42120C) for the power supply of the
Dual Battery Charger.
1. Plug the cord from the AC adaptor into the AC adaptor jack of the Dual Battery
Charger.
2. Plug one end of power cord into the AC adaptor and the other end to a wall outlet.
3.Taking care that the battery pack is oriented correctly, insert it into the Dual Battery
Charger.
This causes the Charge Indicator Lamp to light in red, indicating that charging has
started.
Charge Indicator Lamp
Off: Not charging
Red: Charging
Red Flashing: Battery pack problem
Green: Charging complete
Green Flashing: Standby due to the surrounding temperature being beyond the
specied temperature range (Approximately 0°- 40°C) (charging
resumes when the temperature reaches the range.)
To Next Page
Loading...
Need help?
General