6
EN
Part 1 Getting Ready
Important!
x
Be sure to read this section before attempting to use the printer.
Power Supply
The printer can run on 6 AA-size alkaline batteries. Be sure to use
alkaline batteries only. You could also use a separately available AC adaptor.
x
For information about how to connect the optionally available AC adaptor,
see page 22.
Replacing Batteries
The message “
LOW BATTERY!
” appears on the display if battery power is low
when you perform any of the following operations.
x
Turn power on
x
Execute a print operation
Whenever the “
LOW BATTERY!
” message appears, press
OK
to clear it from
the display. You should still be able to perform some printer operations, but
some power intensive operations (like printing) may become impossible if
battery power is too low. In any case, you should replace batteries as soon as
possible after the “
LOW BATTERY!
” message appears.
To load batteries
Caution
x
Do not touch the springs inside the battery
compartment cover with your fi ngers while
loading or replacing batteries. The springs
have sharp areas and can cut your fi ngers.
Battery Life
• Printing of approximately four 18mm tape cartridges under standard
printing conditions
- Printing text or graphics that contain large areas of black, and
printing under cold temperatures can shorten battery life.
General Guide
Power Key
Turn power on and off.
Function key
Letter keys
Display (LCD)
Tape cutter button
Tape outlet
AC adaptor connection terminal
Connect the separately available AC adaptor.
To Next Page
Loading...
Need help?
General
