Timbre Type Specific Operation This operation differs in accordance with the Timbre Type (see
10.1 About Timber Type ) setting.
• Timbre Type: Melody
Sustain off/on control is performed in accordance with the value of the received message. For
information about the relationship between setting values and send/receive values, see the 25.1
Off/On Setting Value Table in VII Setting Values and Send/Receive Values .
• Timbre Type: Piano
Continuous control of the following is performed in accordance with the value of the received
message.
– Piano note decay rate
For information about the relationship between setting values and send/receive values, see 25.2
Damper Pedal Setting Value Table in VII Setting Values and Send/Receive Values.
• Timbre Type: LM (Linear Morphing) Piano
Continuous control of the following is performed in accordance with the value of the received
message.
– Piano note decay rate
– Resonance characteristics and decay rate of Damper Resonance effect resonance note
see25.2 Damp er Pedal Setting Value TableinVII Setting Values and Send/Receive Values.
• Timbre Type: Drum
The received message do es not affect sound source operation.
8.10 Portamento Switch (41H)
Format
Message Format: BnH 41H vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the 25.1 Off/On
Setting Value Table in VII Setting Values and Send/Receive Values .
Send This message is not sent by this Instrument.
Receive Receipt can be use to switch portamento between enabled (On) and disabled (Off).
8.11 Sostenuto (42H)
Format
Message Format: BnH 42H vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the 25.1 Off/On
Setting Value Table in VII Setting Values and Send/Receive Values .
15
To Next Page
Loading...
Need help?
General
