Casio QV-R40 - To Copy a File from a Memory Card to Built-In Memory

USING A MEMORY CARD
134
To copy a file from a memory card to
built-in memory
With this procedure you can copy one file at a time.
1. Perform steps 1 through 3 of the procedure
under “To copy all the files in built-in memory
to a memory card”.
2. Use ["] and [#] to select “Card Built-in”,
and then press [SET].
3. Use [$] and [!] to select the file you want to
copy.
4. Use ["] and [#] to select “Copy”, and then
press [SET].
• This starts the copy operation and displays the
message “Busy....Please wait...”.
• The file reappears on the monitor screen after the
copy operation is complete.
• Repeat steps 3 through 4 to copy other images, if
you want.
5. Press [MENU] to exit the copy operation.
NOTE
• Files are copied to the folder in built-in memory
whose name has the largest number.