56
BASIC IMAGE RECORDING
Zoom out Zoom in
2.
Compose the image, and then press the
shutter release button.
NOTES
• The optical zoom factor also affects the lens
aperture.
• Use of a tripod is recommended to protect against
hand movement when using the telephoto setting
(zoom in).
Digital Zoom
Digital zoom is activated after you reach the maximum
optical zoom factor (3X). It enlarges the part of the image
at the center of the image screen. The range of the digital
zoom factor is shown below.
Digital Zoom Factor Range: 3X to 9.6X
(in combination with optical
zoom)
1.
In the REC mode, press [MENU].
2.
Use [#] and [$] to select the “REC” tab.
3.
Use [!] and ["] to select “Digital Zoom”, and
then press [$].
4.
Select “On”, and then press [SET].
• Selecting “Off” disables digital zoom.
To Next Page
Loading...
