Casio QV-R40 - Assigning Functions to the [ ] and [ ] Keys

89
OTHER RECORDING FUNCTIONS
Assigning Functions to the [#] and ["]
Keys
A “key customization” feature lets you configure the [#]
and ["] keys so they change camera settings whenever
they are pressed in the REC mode. After you configure the
[#] and ["] keys, you can change the setting assigned to
them without going through the menu screen.
1. In the REC mode, press [MENU].
2. Select the “REC” tab, select “L/R Key”, and
then press ["].
3. Use [!] and [$] to select the setting you
want, and then press [SET].
NOTE
• The initial default setting is “REC Mode”.
When you want to assign this function to
[#] and ["] keys:
Recording mode
• [#] and ["] cycle through recording
modes: Snapshot, Best Shot, Movie
(page 162).
EV shift
• [#] decreases compensation, ["]
increases compensation (page 70).
White balance setting
• [#] and ["] cycle through white
balance settings (page 71).
ISO sensitivity
• [#] and ["] cycle through sensitivity
settings (page 84).
Self-timer mode
• [#] and ["] cycle through self-timer
modes (page 61).
No function assigned
Select this:
REC Mode
EV Shift
White Balance
ISO
Self-timer
Off