To Next PageTo Next PageWhat to do if a system problem on my Casio XJ-H2600 may cause problems with some functions?
Turn off the projector, disconnect the power cord, and wait for all of the projector’s indicators to go out. Next, reconnect the power cord and turn the projector back on. Press the [ESC] key to clear the warning message. If the error occurs again when you turn power back on, contact your retailer or authorized CASIO Service Center.
Why does the message “Please input the password.” appear on my Casio Projector?
The message “Please input the password.” appears because the “Power On Password” setting is enabled. Input the correct password, and then press the [ENTER] key.
How to change the language on a Casio Projector?
To select the language you want: 1. Press the [MENU] key to display the setup menu. 2. If the input signal is HDMI, press [T] four times and then press the [ENTER] key. If the input signal is not HDMI, press [T] five times and then press the [ENTER] key. 3. Press [S] twice and then press the [ENTER] key to display the language selection menu. 4. Use the [T] and [S] keys to move the highlighting to the language you want to select and then press the [ENTER] key. 5. Press the [MENU] key to exit the setup menu.
Why does the light source unit not light on my Casio Projector?
The light source unit has reached the end of its service life or it is malfunctioning.
General
