26
Pressing the [MENU] key displays the Setup Menu shown below on the projection screen. You can
use this menu to adjust projected image brightness, contrast, and other settings, and to change
projector settings.
The guidance shows the key operations that can be performed for the currently selected (highlighted)
menu item.
Using the Setup Menu (MENU)
Basic Setup Menu Operations
To do this: Perform this operation:
Display the Setup Menu
Exit the Setup Menu
Press the [MENU] key. Pressing the [MENU] key to exit the Setup Menu will save the
settings you configured while it was displayed.
Select a menu item Use the [] and [] keys to move the highlighting to the menu that contains the menu
item you want to select and then press the [ENTER] key. Next, use the [] and []
keys to move the highlighting to the menu item you want to select.
Configure the setting of a
menu item
If a menu item that has options or setting values to the right, use the [
] and [
]
keys to change the setting.
For a menu item that has “Modify[ENTER]” or “OK[ENTER]” to the right, press the
[ENTER] key to display a dialog box for configuring the setting.
Menu Items
(Main Menu)
Highlighting
Menu Item
(Sub-menu)
Guidance
(Network Model Screen Shot)
To Next Page
Loading...
Need help?
General
