68
Troubleshooting
The POWER/STANDBY indicator and STATUS indicator change to show the current status of the
projector as described in the tables below.
POWER/STANDBY indicator
STATUS indicator
The POWER/STANDBY and STATUS indicators both light amber immediately after the
projector is plugged into a power outlet.
Indicators
When the indicator is doing this: It means this about the projector:
Lit red Connected to a power source, but turned off (standby mode)
Flashing green Warming up after being turned on
Lit green Power on, operation normal
Flashing red Internal process in progress immediately after power off
When the indicator is doing this: It means this about the projector:
Lit green “On” selected for the “Light Control” setting
Lit (or flashing) red Error
Lit (or flashing) amber Error
To Next Page
Loading...
Need help?
General
