Cassida 8800R Mixed Currency Counter & Sorter
- Beep
- Date & Time
- Sleep Mode
- Auto Print
2. Detections
3. Modes
4. Service
- Software Update
- Calibration
- Detection Sensitivity
- Data
- Factory Reset
5. Product Information
Key beep: beeping that occurs with every action
(screen or control panel press).
Warning beep: beeping that occurs when the machine stop while
counting (suspect bill, different denomination etc.).
Use right arrow to select the value and back to confirm.
Sets the date and time displayed on the home screen and the printed
receipt. First use up and down arrow to select either the date format
or the date & time. When on the date format, press right arrow to
select, then back arrow to confirm. When on the date & time, press
right arrow to move the cursor right, press up and down arrows to
change the date and time, and press right arrow past the minutes to
confirm the change. ‘’set ok’’ should be displayed on the screen. Press
left arrow to go back to the menu.
Sets the timer for sleep mode.
Sets when the machine auto-prints.
Sets the detection systems “ON” or “OFF”
Turns “ON” and “ OFF” modes. Modes that are OFF will not appear
on the home screen.
Accesses 8800R’s service.
Updates software (see https://www.cassidausa.com/faq-8800r)
Calibrates the contact image sensors. Note that Cassida calibrates
each unit before shipment to provide the best performance.
Sets the detection systems sensitivity. Note that Cassida uses the
optimum sensitivity settings by default.
Keeps track of the number of bills counted and other data related to
the 8800R usage.
Resets settings to default values.
Displays information about the software version.
Sub-Menu (continued) Description (continued)
19
To Next Page
Loading...
Need help?
General
