Moving money forward
®
If this function is activated, AUTO CONT will appear on the right side of the
display followed by a check mark during the regular counting mode.
5.8 Auto Add
This function allows the last total to be automatically added into a total sum
after removing the amount from the scale. ON is the default setting. To change
orcongureAUTOADD,pressOKwhenAUTOADDisshownintheSETUPmenu.
Press<or>tochooseONorOFF.PressOKtoconrmyourchoice.
To continue with SETUP menus, press < or >. To exit the AUTO ADD set up menu,
press CLEAR.
If this function is activated, AUTO ADD will appear on the right side of the display
followed by a check mark during the regular counting mode.
5.9 Auto Save
This function allows the complete results of the last count to be automatically
saved in the scale’s memory, even if the scale is turned off. ON is the default
setting.TochangeorcongureAUTOSAVE,pressOKwhenAUTOSAVEisshown
intheSETUPmenu.Press<or>tochooseONorOFF.PressOKtoconrmyour
choice.
To continue with SETUP menus, press < or >. To exit the AUTO SAVE set up menu,
press CLEAR.
5.10 Currency
Use to select the desired currency. The TillTally is pre-set to count United States
currency and EUROS at this time. The chosen currency will be shown on the
display. To change CURRENCY, press OK when CURRENCY is shown in the SETUP
menu.Press<or>tochooseUSDorEUR.PressOKtoconrmyourchoice.
18
To Next Page
Loading...
Need help?
General
