Carefully read and follow the manual for installation:
◆
produce heat.
◆ In order to avoid being overheated please keep the unit's ventilation open.
◆ Do not expose this appliance to rain or moisture.
◆ Keep the amplifier in a certain distance so that it can be easily connected.
◆ Amplifier should install steadily and make sure all four feet are on the same level.
◆ Keep the amplifier over 15cm's distance to the surrounding walls.
Do not place the machine near heat sources such as radiators, heat registers or other products that
Installation
11
Please make sure local voltage level is matched with
the input level of the amplifier, which indicates on the
rear panel. Too low or too high voltage may cause
problems or shorten the amplifier's life.
NOTE:
Tube Replacement
12AU7、ECC82、E82CC、ECC802S
6550EH、KT88EH、6550、KT90、KT100、KT120
To Next Page
Loading...
