CBE PC320-ST - Userss Setting

USER’S SETTING
s
To enter the set mode, press the PRO ” button
(ref. ) for more than 2 seconds
“ G
3 from the main
clock screen.
- by selecting “ ” you operate the menu to
set only the parameters clock and alarm clock.
CLOCK
- by selecting “ ” you operate the menu
to set all parameters.
SYSTEM
s
Select, by pushing the arrow keys ref. 1 and 2, the
setting menu you want to operate and then
confirm by pushing the PROG button e 3; “ ” r f.
s
By using the arrow keys ref. 1 and 2 you can
modify the setting of the parameters.
s
Confirm the setting by pushing “the PROG” button
(ref. 3), you then go automatically to next
parameter.
s
Press “ ” more than once
to save the settings and exit the setting mode.
the PROG button (ref. 3)
s
To exit without saving wait 0 seconds without
pressing any key.
3
CLOCK MENU
20
EN
CLOCK
Clock setting:
- HOURS (blinking)
- MINUTES (blinking)
ALARM CLOCK
- ON (a )ctivation
- OFF (deactivation)
Activation of alarm clock:
- HOURS (blinking)
- MINUTES (blinking)
Set alarm clock time (only if alarm clock has been
previously activated):
clock
alm.clock
ON
alm.clock