20
Opening the Appliance in an
Emergency
In the event of a power
failure, the door can be
opened using the
mechanical release,
activated by means of the
lever in the bottom of the
appliance:
1 Turn the “Program Selector” knob to “Off” and disconnect
the power supply plug from the socket.
2 Drain off the water (see page 25)
3 Pull the lever down and open the door.
Warning: Scalding hazard: before opening the door, check that
the appliance does not contain boiling hot water and detergent
which may pour out and cause injury when the door is opened.
Warning: Do not open the door using the emergency release
lever while the drum is turning.
To Next Page
Loading...
