CDA CI931 Manual For Installation, Use And Maintenance

Electrical information
Warning! This appliance must be earthed.
The mains lead of this appliance has been fitted with a BS 1363A 13 amp fused plug. To change a fuse in this type of plug,
follow the steps below:
1. Remove the fuse cover and fuse.
2. Fit replacement 13A fuse, ASTA approved to BS 1362 type, into the fuse cover.
3. Replace fuse cover.
Important: Do not use the appliance without the fuse cover in position.
How to connect an alternative plug
)FTHElTTEDPLUGISNOTSUITABLEFORYOURSOCKETOUTLETTHENITSHOULDBECUTOFFANDDISPOSEDOFSAFELYTOAVOIDTHERISKOF
electric shock. A suitable alternative plug of at least 13 Amp rating to BS 1363 should be used.
As the colours of the wires in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:-
s 4HEWIREWHICHISCOLOURED'2%%.AND9%,,/7MUSTBECONNECTEDTOTHETERMINALWHICHISMARKEDWITHLETTER%OR
 BYTHE%ARTHSYMBOLORCOLOURED'2%%.AND9%,,/7
s 4HEWIREWHICHISCOLOURED",5%MUSTBECONNECTEDTOTHETERMINALWHICHISMARKEDWITHTHELETTER.OR 
 COLOURED",!#+OR",5%
s 4HEWIREWHICHISCOLOURED"2/7.MUSTBECONNECTEDTOTHETERMINALWHICHISMARKEDWITHTHELETTER,OR 
 COLOURED2%$OR"2/7.
)FINDOUBTREGARDINGTHEELECTRICALCONNECTIONOFTHISAPPLIANCECONSULTAQUALIlEDELECTRICIAN$ONOTSHORTENTHE 
supply cable, the appliance may require removing for servicing.
N.B. Ensure that the plug socket is situated in an easily accessible place.
6

CDA CI931 Specifications

General

Door hinge	Left
Product color	White
Appliance placement	Freestanding
Washing capacity	6 kg
Maximum spin speed	1200 RPM
Number of drying programs	15
Washing class	A

Weight and Dimensions

Depth	545 mm
Width	596 mm
Height	818 mm