39
Drill the hinge and catch holes as per the diagram on the bottom
of page 38. The sides that these holes shall need to be drilled will
depend upon the style of the decor door and the side that you wish
for it to be hinged upon. It is not uncommon for décor doors to have
these holes already drilled, particularly when they are reversible.
Fix the magnetic catch assembly receivers (Fig. 23, page 40) to the
front of the machine and the catch plates (CP in Fig. 22, page 40) to
the furniture door.
Provided all is properly aligned, fit the decor door (Fig. 24, page 40).
To Next Page
Loading...
