CDA Oven - 4.4 Programmed Cooking: Delayed Start

15
--
Cooking with delayed start and desig-
nated cooking end time
PPrroocceeeedd aass wwiitthh ssttaannddaarrdd pprrooggrraammmmeedd ccooookk--
iinngg..
- After setting the cooking time, press the
“ ” touch control until the “ ” end of
cooking indicator flashes
The display flashes 0:00 to indicate that you
can now adjust the setting (fig.1).
- Press the
++
or
--
touch control to set the de-
sired cooking end time.
Example: end of cooking at 13:00 (fig.2).
The end of cooking time is automatically
recorded after a few seconds or when you
press the “ ” touch control.
The end of cooking time display stops flash-
ing.
AAfftteerr tthheessee tthhrreeee sstteeppss,, tthhee oovveenn hhe
eaattiinngg iiss
ddeellaayyeedd ssoo tthhaatt ccooookkiinngg eennddss aatt 1133::0000..
At the end of cooking (end of programmed
time),
- The oven stops,
- The cooking time indicator and 0:00 flash
(fig.
3).
- A series of beeps is emitted for a few min-
utes. The beeps are definitively stopped by
pushing on any touch control.
The displays once again shows the time of
day when the function selector is returned to
0 (fig.4
).
fig.1
fig.2
fig.3
fig.4
PROGRAMMED COOKING
••
4 / USING YOUR APPLIANCE
EN