Fig. 27
Room mode
The robot will carry out a cleaning cycle under Auto mode and then will return to the starting point.
Press the room cleaning button on the App display.
Fig. 28
To ensure an efficient cleaning of the room, close the door.
Suction power level function
Select the desired robot’s suction power during the cleaning process. There are 3 suction power levels: Turbo,
Normal and Eco. The power level function can also be turned off if you wish to use the Wet & dry tank for scrubbing
only.
Fig. 29
Scrubbing intensity levels function
Select the desired water intensity level during the scrubbing process. There are 3 water levels:
High, Medium or Low. The scrubbing intensity function can also be turned off if you wish to use the Wet & dry tank
for sweeping only.
Random mode
The robot will start cleaning randomly and will return to the charging base smartly when it runs out of battery. The
robot will not create maps under this mode.
This mode can be activated from the App.
Manual mode
The robot can be moved manually using the direction buttons on the App
Cleaning scheduling
This robot includes schedule settings in order for you to customise the cleaning cycles. The robot can be scheduled
To Next Page
Loading...
