Fig. 24
Thorough Scrubbing mode
Attach the mop cloth to the water tank and fill the tank with water.
Take the dust tank out.
Install the water tank in the robot and turn it on.
Fig. 25
Use the App to select the desired scrubbing power level: High, Medium or Low.
Once the scrubbing mode is selected, the device will perform the function “All in One” to vacuum, mop, scrub and
sweep at the same time thanks to its mixed tank.
Note: If you want to sweep the floor, skip the water-filling step.
To ensure perfect scrubbing from the start, it is suggested to dampen the mop cloth evenly with water before use.
Spiral mode
The robot will carry out an intense cleaning of a specific area when this mode is activated.
The robot will start cleaning at a specific point and will move outwards performing spiral movements (1 meter). Then,
it will return to the starting point in spiral movements again.
Before operating the robot under Spiral cleaning mode, place it on the spot to be cleaned.
Press the spiral cleaning button on the App.
Fig. 26
Edge mode
When this mode is selected, the robot will clean along walls and around furniture (table or chair legs, for example).
Press the edge cleaning button on the App.
To Next Page
Loading...
