Warning: If there is no good access to the charging base, the robot will not be able to return to its charging position.
In that case, once the robot has stopped, take it manually to the charging base.
Pause
Press the power button on the robot to pause the cleaning process.
Press the power button on the robot to resume the cleaning process.
Fig. 22
Return to the charging base
Press the back home button on the robot in order to send the robot to the charging base.
Turn off
Long press the power button to turn the robot off.
Fig. 23
Warning: The robot vacuum cleaner has a power switch located on its main body. If the robot is not going to be used
for long periods of time, it is suggested to switch it off. If the robot is switched off, it will restore factory default settings
as a safety measure. The robot will only carry out scheduled cleaning if it has been scheduled while the switch is ON,
otherwise, it will have to be scheduled again from the App.
Cleaning modes
This robot includes different modes and different functions that can be activated from the App.
Auto mode
Press the power button for the robot to start Auto cleaning mode.
The robot will clean the whole surface, edges, around objects such as tables, chairs etc. Once it starts running out of
battery, it will return to the charging base.
To Next Page
Loading...
