Beeps Error Solution
01 1 Driving wheel error Check if the driving wheel is blocked.
02 2 Side brushes error Check if the side brush is blocked and clean it.
03 3 Fan error Clean dust or other objects in the air ducts channel.
02 4 Main brush error
Check if the main brush is entangled or blocked and
clean it.
Other possible situations
Problem Solution
The robot cannot be activated
Make sure the main power switch is in the ON position. Make sure the
battery is fully charged. If the problem persists, turn the main power
switch off and restart it.
The robot stops operating suddenly
Check if robot is trapped or stuck on an obstacle. Check if the battery
level is too low. If the problem persists, turn the main power switch off,
wait for 2 seconds and restart it.
To Next Page
Loading...
