cecotec CONGA 2290 - Additional Cleaning Modes; Power and Intensity Settings; Specialized Features

36 | CONGA 6090
ENGELSK
Room mode
- When this mode is selected, the robot will clean in Automatic mood and
then it will get back to the starting point.
- Press the room cleaning button on the remote control or on the App. Fig.
31
- To ensure an ecient cleaning of the room, close the door or use the
magnetic strip to delimit the cleaning area.
Suction power level function
Press the power level button on the remote control or on the App in order
to control the robot’s suction power during the cleaning process. There are
3 suction power levels: Turbo, Normal and Eco. You can turn the power level
function o if you want to use the mixed tank only to scrub. Fig. 32
Scrubbing intensity function
Press the scrubbing levels button on the remote control or on the App to
adjust the water level during the scrubbing process. There are 3 water
levels: High, Medium or Low. You can turn the power level function o if you
want to use the mixed tank only to sweep.
Random mode
- The robot will clean randomly and will smartly return to the charging
base when it runs out of battery. The robot will not create any map under
this mode. This mode can be selected from the App.
Manual mode
The robot will move manually by using the arrows in the remote control or
on the App.
Magnetic strip
Use the magnetic strip included to delimit the cleaning area so the robot is
not able to access to certain areas.
Cleaning scheduling
This robot includes schedule settings in order for you to customize the
cleaning cycles. The robot can only be scheduled through the remote
control or through the App.
Note
Make sure the remote control is close to the robot when setting the clock or
scheduling cleaning cycles.