CONGA 6090 | 37
ENGLESK
Setting the remote control’s time
- Press the clock button on the remote control. Digits will start blinking.
- Select the current day of the week by pressing the upwards and
downwards buttons. Fig. 33
- Use the left and right buttons to set minutes and hour. Use upwards and
downwards buttons to change the digit while it ashes. Fig. 34
- Finally, press the power or the clock button. The robot will beep when the
time settings have been conrmed. Fig. 35
Cleaning scheduling
- For a better and more comfortable cleaning, the robot includes a schedule
function to set daily schedules through the remote control. In accordance
to the conguration, the robot will automatically start cleaning the
selected days at the desired time.
- The time options on the remote control are: 12:00 a. m.–11:59 p.m. and
12:00 p.m.–11:59 p.m.
- Before setting the time and the robot conguration, make sure the robot’s
power switch is on and that the power button on the robot is lit up.
Conguration with the remote control
- Press the schedule button on the remote control. Digits will start blinking.
Fig. 36
- Use direction buttons to select the day. Once selected, use right and left
buttons to select minutes and hours. Use direction buttons when digits
are blinking to congure the desired minutes and hours. Press the power
button to save settings. Enter the desired days and follow the same steps
to schedule them. Fig. 37
- Finally, press the schedule button to exit scheduling mode. The robot
will beep once indicating the scheduled cleaning settings have been
conrmed.
- The user may schedule as many days per week as desired. The home
screen will display when the robot is scheduled.
- Cancelling scheduled cleaning
- Press the schedule button on the remote control, select the day you wish
to delete and change the set time to 00:00 am., this is the time to be set to
cancel the cleaning programme. Fig. 38
To Next Page
Loading...
