10 © CEDES | V 2.2
5.11 System component overview
Table 3: APS component overview
Note: All parts in the “SUPPLY” column, which are listed as mandatory, must be original parts from CEDES.
The detailed list of material required for the installation of the APS system is provided by the system integrator.
6. Installation and adjustment
The installation of the system has always to be adapted to the type of elevator used. Depending on this, there can be
alterations to the standard installation procedure. In all cases, the installer must follow the instructions of the system
integrator. The following section describes the standard installation of the system as typically used.
No. of pieces Item Supply Remark
1 APS sensor Mandatory Incl. cable and a RJ45 connector
1 Mounting bracket Optional For the APS Sensor;
incl. assembly material for the APS sensor
1 Code tape Mandatory In code tape box;
refer to the price list for standard lengths
2 Tension lock Mandatory For code tape;
incl. cable tie
1 Tension weight 10 kg Optional Incl. assembly material
3 Code tape end cover Mandatory
1 Guide clip Mandatory Customer-specific version on request
1 Position indicator clip Mandatory Customer-specific version on request
1 APS Manual Mandatory
1 APS Safety Manual Mandatory
1 TÜV certificate Mandatory
To Next Page
Loading...