2 © CEDES | V 2.2
1. About this manual
This installation and operation manual, with metric
measurements is the original version.
The version number is printed at the bottom of each page.
To make sure you have the latest version, visit www.cedes.
com where this manual and related documents can be
downloaded.
1.1 Measurements
Measurements are, if not stated otherwise, given in
mm (non-bracketed numbers) and inches (numbers in
brackets).
1.2 Related documents
APS datasheet en
Part No. 001 201 en
APS Safety Manual en
Part No. 113 317 en
1.3 CEDES headquarter
CEDES AG
Science Park
CH-7302 Landquart
Switzerland
CEDES AG reserves the right to modify or change technical data without prior notice.
Contents
1. About this manual 2
1.1 Measurements 2
1.2 Related documents 2
1.3 CEDES headquarter 2
2. Safety information 3
2.1 Non-intended use 3
3. Symbols, safety messages 3
3.1 Safety messages categories 3
4. Introduction 4
4.1 Features of the APS 4
4.2 Category 4
5. Overview 4
5.1 Type description 4
5.2 APS system integration 5
5.3 Intended use 7
5.4 System segregation 7
5.5 APS sensor 7
5.6 Code tape 8
5.7 Elongation of the code tape 8
5.8 Mounting clips 8
5.9 Code tape presence control 9
5.10 Environmental requirements 9
5.11 System component overview 10
6. Installation and adjustment 10
6.1 Installation overview 11
6.2 Unpack and prepare the code tape
for final installation 12
6.3 Installation of the APS sensor 15
6.4 Clip installation and adjustment
of the APS system 20
7. Electrical connection 21
7.1 Interface from the APS sensor
to the downstream processing unit 21
8. Start-up 22
9. Operation 22
10. Troubleshooting 23
11. Maintenance 23
12. Disposal 24
13. Product label 24
14. Technical Data 25
15. Dimensions (all dimensions in mm) 26
To Next Page
Loading...