ENGLISH
16
General safety instructions
• CEDIMA
®
• Technical Documentation • All rights reserved as per ISO 16016 • Subject to modications due to progressive development •
3.13 Transporting the machine
• For loading or transporting the machine, use only
lifting and transporting devices and equipment with a
sufcient bearing force!
• Determine an experienced instructor for the lifting/
hoisting process!
• Only lift the machine properly in accordance with the
operating manual (position, points of attachment for
hoisting devices), using hoists!
• Only use a suitable transport vehicle with sufcient
load-bearing capacity!
• For transport, the saw bade has to be dismantled!
• The blade guard and blade guard holder can be dis-
mantled for transport!
• Before transporting the machine, always make sure
that the accessories are stowed away in such a way
that they cannot cause an accident!
• The machine must always be kept straight and hori-
zontal, otherwise the fuel will run out of the tank!
• Secure the load reliably! Use suitable attachment
points!
• Before loading, secure the machine and its assem-
blies to ensure that it cannot move accidentally!
Attach a corresponding warning sign! Remove the
devices properly before putting into operation again!
• Carefully remount and secure parts that must be
removed for transport purpose before putting into ac-
tion again!
• Even when relocating slightly, disconnect the ma-
chine from any external power supply! Before putting
into operation again re-connect the machine properly
to the power supply!
• When resuming operation, only proceed as described
in operating manual! The machine may only be
installed and operated in accordance with the instruc-
tions of this operating manual!
To Next Page
Loading...
