Cedima CF-2116 D - Necessary, Recommended Optional Accessories

ENGLISH
8
General information on the product
• CEDIMA
®
• Technical Documentation • All rights reserved as per ISO 16016 • Subject to modications due to progressive development •
1.4 Necessary, recommended optional accessories
for the operational readiness of the CF-2116 D
The CEDIMA
®
joint cutters of series CF-2100 enable professional and effective working on the job site.
For operating the CF-2116 D we recommend the following equipment (unless already mounted):
No. Description
Article-No.: 30000053 Conversion set* for saw blade-Ø 400 mm for CF-2116 D (speed of cutting shaft
2250 rpm) cutting shaft belt pulley, 4 V-belts, 400 mm blade guard
on request Equipment for ush cutting; ush cutting ange, ush cutting blade guard
** BCE-39 SA
diamond saw blade for separating cuts in cured concrete with medium-hard to
hard aggregates and high reinforcement
** BCE-23 Laser
‘universal’ diamond saw blade
**, *** AR Generation 2 Laser
diamond saw blade for dry cutting in hard material
(special personal protective equipment should be worn)
** ACE-20 Laser
diamond saw blade with protective segments for separating cuts in asphalt
**, *** CA Generation 2 Laser
diamond saw blade for dry cutting in abrasive materials
(special personal protective equipment should be worn)
** FBC-420 Laser
diamond saw blade with protective segments for slot and separating cuts in
asphalt and green concrete approx. 2–3 days old or with hard aggregates
** FBC-430 Laser
diamond saw blade with protective segments for slot and separating cuts in
asphalt and green concrete approx. 3–5 days old or with very hard aggregates
** FBC-HB 2 Laser
diamond saw blade with protective hammer segments for slot cuts in hall oors,
also in steel bres
** FBC-HB 3 Laser
diamond saw blade with protective hammer segments for slot cuts in hall oors,
also in steel bres
* CEDIMA
®
shop assembly
** as per present CEDIMA
®
price list, present joint cutter brochure – or address directly to CEDIMA
®
*** Using dry cutting saw blades in wet cutting mode will increase the life time of your diamond saw blade
For further accessories please refer to the present CEDIMA
®
-price list.
CEDIMA
®
is not responsible for any damages resulting from the operation of accessories that do not
correspond to CEDIMA
®
’s specications.
For information on the suitable type of CEDIMA
®
diamond saw blade please refer to the price list and the
product brochure. For special applications please ask CEDIMA
®
for advice.