CEFLA MyRay Hyperion X9 - Page 66

66
OPERATOR'S MANUAL
EN
2D acquisitions
Requirements for PC workstations dedicated to X-ray acquisitions in the case they or the device are dedicated only
to two-dimensional examinations. Please find below the minimum requirements required. Characteristics lower than
those specified could result in poor performance or impossible acquisition of X-ray examinations from this
workstation.
Operating system
Windows 10 Pro 64 bit build v1607
Windows 8.1 Professional 32 / 64 bit Update 3
Windows 7 Professional 32 / 64 bit SP1
Processor
Intel Core i3, or next
Hard Disk
100 Gb 7200RPM
System memory
4 GB
Video card
3D VideoCard 1 GB physical RAM
Monitor
(minimum resolution)
4:3 monitor
1280 x 1024 pixel (or higher)
Wide Monitor
1344 x 768 pixel (or higher)
Power supply
≥ 180 W
Additional devices
1 Ethernet interface, 100Mbit, HUB-switch
recommended
DVD-ROM (recommended)
Additional workstations
For the minimum requirements of the workstations which are not dedicated to the X-ray acquisition and indications on
where the iRYS Station or the iRYS Viewer will be installed, see the iRYS manual.