Safety information
______________________________________________________________________________________
NewTom VGi evo – Service Manual rev 6 2-2
Reinstall all covers correctly before returning the machine to the customer.
Do not under any circumstances make mechanical or electrical modifications to the equipment. Manufacturer
is not responsible for regulatory compliance of a modified product.
Connect to the device only computers, computer peripherals and cables in compliance to the manufacturer
specifications.
CAUTION:
There are no user serviceable parts inside the unit.
Broken and/or defective parts must be returned to manufacturer and
replaced with spare part approved by the manufacturer or distributor.
CAUTION:
For continued protection against risk of fire, replace only with same
type and rating of fuse.
Electrical safety
Observe the following rules when working on electrical equipment.
WARNING:
The “Newtom VGi evo” is an equipment, containing high voltage
devices and must be opened only by qualified personnel, authorized
by CEFLA s.c.
WARNING:
Use only approved tools and test equipment. Some hand tools have
handles covered with a soft material that does not insulate you when
working with live electrical currents.
WARNING:
Metal objects are good electrical conductors.
Find the room emergency power-off (EPO) switch, disconnecting switch, or electrical outlet.
If an electrical accident occurs, you can then operate the switch or unplug the power cord quickly (if applied).
Do not work alone under hazardous conditions or near equipment that has hazardous voltages.
Disconnect all power before:
1. Performing a mechanical inspection
2. Working near power supplies
3. Removing or installing main units
Before you start working on the machine, unplug the power cord. If you cannot unplug it, ask the customer to
power-off the wall box that supplies power to the machine and to lock the wall box in the off position.
To Next Page
Loading...
