USER’S MANUAL
The A2210 server contains two methods implemented for cable type detection. The
two different cable types (40 or 80 conductor) dictate the overall transfer rate ability
of the host or bus. Transfer rates greater than Ultra DMA 2 require an 80-conductor
cable.
Miscellaneous
The miscellaneous connectors that are used internal to the chassis include:
Ten 3-pin fan headers that provide rotation sense feedback. All headers are
for the system fans that are located between the front access panel board and
the main board. Default condition has them operated at a full on with the
ability to detect a fan failure and report this to the server management board.
•
•
•
Two supplemental 3-pin fan headers near the processors that provide
rotation sense feedback for lab purposes.
One 132-pin ATX power supply connector, supplying 500W power to the
main board and other system devices.
1.6 Contacting Celestica
Global VSP Order Desk and Service Center
• E-Mail: vsp_product_info@celestica.com
• Phone 1-866-258-8475
1-10
To Next Page