Chapter
3
USER’S MANUAL
3
System Interfaces
Switches, LEDs, and more . . .
T
his chapter provides details on the switches, buttons, and LEDs that a user
will need to know for proper operation of the server.
3.1 Switches/Buttons
There are two switches on the front of the server - the Reset and Power buttons.
Table 2 describes the function of each switch.
Table 2. Button Descriptions
Function Description
Power Button
When in the off state, a press powers up the
system. In the booted state, a press shuts the
system down.
Reset Button
Pressing reset at any time during the full on state
generates a system wide reset.
3-1
To Next Page