www.cellarcool.com | Page 31
Magnum Series
2. Using a drill with a ⁄” bit, drill four holes in the drywall for the screws. Insert the four (4) provided drywall anchors
into the drywall, then tap them in with a hammer until they are ush with the wall.
WALL MOUNT BRACKET INSTALLATION, CONTINUED
3. Place bracket against wall, aligning screw holes with drywall anchors. Insert the four supplied Phillips-head screws
into the drywall anchors. Tighten the screws to secure the bracket to the wall.
To Next Page
Loading...
