Cellink INKREDIBLE - Page 14

14
Grab
here!
Grab
here!
www.CELLINK.com
When unpacking your INKREDIBLE 3D Bioprinter, be careful not to grab onto any
movable parts or lose components. We recommend you grab it by the side window
frames and pull it out from the box.
Once the INKREDIBLE 3D Bioprinter has been carefully taken out of the box, all protecve
lms, zip es and plasc parts prevenng the axes to move during transportaon can
be removed. Once all protecve materials have been removed, the INKREDIBLE can
be placed at its intended place of operaon (for example inside a biological hood or
laboratory bench).
WARNING! Always be two people present when unpacking your INKREDIBLE
3D bioprinter to avoid personal injury.
CAUTION! The INKREDIBLE should never be placed on wet, damp, moist or
humid surfaces.
CAUTION! Do not force or tear anything during the unpacking or setup process
as this may irreversibly damage your INKREDIBLE 3D Bioprinter.