CENNTRO TeeMak - Light Switch

2
Features and Controls
20
Features and Controls
Clean the Wiper
After toggling the wiper switch in the
direction towards the steering wheel,
the wiper nozzle will spray washing
liquid, which is used for defrosting,
demisting and cleaning the dust on the
windshield to avoid blocking the vision.
Wiper Maintenance
During the wiper blades wiping, when the wipers move to the highest position,
rotate the key to turn off the power, and the wipers immediately stop wiping and
enter the wiper maintenance state.
Light Switch
① Light switch end knob
A: Light off
B: Position lamps on
C: Low beam lamps on
Turn on the Position Lamps
When the key is at the "ON" position, turn the light switch end knob to the
position, and the position lamps will light up.
Turn on the Low Beam Lamps
When the key is at the "ON" position, turn the light switch end knob to the
position, and the low beam lamps will light up.