Parking Handle
Apply the parking brake: pull up the
parking handle to the locking position.
Release the parking brake: press the
parking handle button ① , gently press
and release it downwards at the same
time.
• Make sure the parking brake is completely released before driving, otherwise
the brake components will overheat during driving, which will affect the
braking performance and aggravate the wear of the brake.
• When parking on a slope, step on the brake pedal with your foot. Do not use
the accelerator pedal to keep the vehicle stationary on the ramp, which may
overheat the motor and cause failure.
Safety Belt
Instructions on Safety Belt
Safety belt is the main safety protection device, which can effectively reduce
accident injuries. When driving the vehicle, you must wear the safety belt correctly.
• Each safety belt is provided only for one person. Do not share the safety belt
with more than one person (including the child).
• Please maintain the correct sitting posture to ensure that the safety belt can
provide the maximum protection in case of emergency braking or accident.
• It is forbidden to sit in the seat for which the safety belt fault has not been
repaired.
To Next Page
Loading...