EasyManua.ls Logo

CENNTRO TeeMak - Failure to Start the Vehicle

Default Icon
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
81
7
Troubleshooting
Troubleshooting
In order to deal with various emergencies, you should be familiar with the
placement and use of all accompanying tools.
After use, the tool shall be cleaned in time and put back in place.
The accompanying tools will be different according to the configuration of
the vehicle model, and the actual vehicle configuration shall prevail.
Failure to Start the Vehicle
If the vehicle does not start:
Check whether there is a fault warning lamp on the combination instrument. If so,
please contact the CENNTRO authorized service center for inspection.
If the combination instrument does not light up, please turn on the hazard
warning lamp. If the hazard warning lamp does not work, it indicates that the
vehicle has no low-voltage power. Please check the starting battery fuse and ACC
gear fuse; If the hazard warning lamp works, please check the instrument fuse.
If the power output is interrupted while driving:
Slow down the speed, keep driving in a straight line, and carefully drive the
vehicle away from the road to a safe place.
Turn on the hazard warning lamp.
Start again according to the vehicle starting method.
If the vehicle cannot be restarted, please contact the CENNTRO authorized
service center for troubleshooting.