Running-In Period
To ensure the service life of the vehicle, the vehicle shall be run in at the initial stage
of driving.
• During the first 500km running-in period, drive the vehicle at medium and low
speeds as possible.
• Do not exceed the running-in speed of 30km/h, and pay attention not to exceed
the speed limit specified by traffic laws.
• Start slowly to avoid rapid acceleration, emergency braking and long-time high-
speed driving.
• Do not overload.
• Avoid towing vehicle.
Inspection Before Driving
It is necessary to check the vehicle before driving. A few minutes of inspection will
help you drive safely and enjoy driving.
• Inspection around the vehicle
» Check whether the tire is damaged or the inflation pressure is appropriate, and
whether foreign matters are embedded in the tread. Take corrective measures
if necessary.
» Check whether the tire nut is loose.
» Make sure that the rearview mirror and combination lamp are clean and not
covered.
» Park the vehicle for a period of time, and check whether there are abnormal
phenomena such as water or other liquid leaks at the chassis of the vehicle.
» Check the chassis for foreign matters.
» Check whether the front combination lamp, rear combination lamp and other
lamps work normally.
• Inspection inside the vehicle
» Check whether the accompanying tools are complete.
To Next Page
Loading...