• Do not add accessories, stickers (including transparent stickers) or other
objects to the camera or its surrounding area.
• Do not strongly impact the camera or its surrounding area. If the camera
is strongly impacted, please contact the authorized service center for
maintenance.
• The camera surface shall be kept clean and unobstructed at all times. Use a
soft wet cloth to clean the camera, so as to avoid scratching the camera.
• Do not use the high-pressure washer to clean the rear view camera for a
long time, and keep at least 30cm away from the rear view camera during
cleaning.
• After disassembling the camera or its mounting bracket, the camera must be
adjusted and calibrated.
• Special tools and equipment are required for camera adjustment and
calibration. It is recommended to contact the authorized service center for
relevant work.
To Next Page
Loading...