• When a separate charging device is used for charging, the power supply
capacity of the power supply socket shall be 16A and the power shall
be above 2.5kW. The AC power supply terminal shall be equipped with a
leakage protector. It is strictly prohibited to use 10A power supply socket for
charging.
Charging With On-Board Charging Device
1. When the vehicle is powered off, the key is at "OFF" position.
2. Take out the charging device and
insert the charging plug into the
power supply socket with reliable
grounding wire.
3. Open the charging port cover at the
rear right side of the vehicle.
To Next Page
Loading...