4
Winch Guide
2. Open the front cabin cover and
confirm that the winch fuse is open
(straight).
3. Pull out the trailer latch and winch
rope.
» Use the winch motor remote
control: press down the winch
motor remote control "IN" or "OUT"
to control the winch to tighten and
loosen, and pull out the trailer
latch and winch rope.
» Winch motor controller: remove
the ru bber wate rproof cap,
connect the winch motor controller
handle, operate the winch motor
controller handle switch, control
the winch to tighten and loosen,
and pull out the trailer latch and
winch rope.
4. Connect the trailer latch and the winch rope to the safety anchor point, slowly
control the winch to tighten the winch rope and complete the escape.
To Next Page
Loading...