Manual Flushing
In consideration of vehicle safety, vehicle cleaning is only limited to exterior
surfaces such as exterior body, windows and interior trim surfaces. If you use
vehicle washing agent, please use plenty of clean water to wash. Dry the vehicle
with the dry cloth. Do not use a high-pressure water gun to clean the cab and the
front compartment, so as to avoid the danger of system damage or electric shock
caused by high-pressure water wetting the high-voltage electrical system.
Clean the Headlamp
To avoid damaging the headlamp plastic lens, do not use aggressive abrasives
or chemical solvents. Do not wipe the lamp or use sharp objects to clean the lens
when the mirror surface is dry.
Clean the Wheel
Depending on the time and mileage, clean the wheels once a week to avoid dust
retention during braking. Use wheel cleaner or warm water and soft sponge. Do
not use friction materials to avoid damaging special machined surfaces.
Clean the Instrument Panel and Other Interior Trims
When cleaning the instrument panel, gently wipe it with the clean and wet soft
cloth.
Try to use mild neutral cleaning agent, and avoid using strong detergent or
degreasing soap.
• Do not soak the interior trims during cleaning.
• Do not use the blade or other sharp objects to remove the dirt on the interior
surface, otherwise the interior surface may be damaged.
• Do not wipe too hard, or the interior trims may be damaged.
• Do not use polishing wax or polishing detergent to clean the instrument
panel, otherwise the instrument panel may reflect on the windshield glass,
obstructing the driver's vision, causing serious injury or even endangering
life.
To Next Page
Loading...